Precautions for high speed gantry punch press:

1. Safety precautions:

1. The operators of high-speed gantry punch machine should learn, master the structure and performance of punch machine equipment, be familiar with the operation procedures, and pay attention to the operation;

2. The safety protection and control device on the gantry punch should be used correctly, and can not be removed arbitrarily;

3. It is not allowed to work half heartedly, drink or doze off;

4. If you need to put your hand into the mold to deal with the problem, you should prevent pressing the emergency button accidentally;

5. Stop the work in time and report to the technical personnel in case of any abnormality in the stamping process.

Two gantry punch die attention:

1. High speed gantry punch die screw must be firm, check whether loose, and timely processing;

2. The mould should be installed firmly, the upper and lower mould should be aligned, the correct position should be ensured, and the empty car should be tested to ensure that the mould works in good condition;

3. The mold should be kept clean and lubricated in time to prevent mold damage and safety problems caused by negligence

Three punch attention:

1. Before starting the machine, check the transmission, connection, lubrication and other parts of the gantry punch and the safety device;

2. Pay attention to whether the machine control device is out of order. First, idle for three minutes to ensure that the gantry punch operates in good condition;

3. Clean up the objects placed on the punch table, and do not chat with each other during operation;

4. Safety ahead, be careful at all times, cut off the power supply and clean up the debris after the operation