Gantry punch equipment in high-speed production must grasp the common problems of operation, otherwise there may be dangerous factors in the work. The operation of the gantry punch must be carried out under the necessary conditions. Therefore, before the operation of the gantry punch, the staff should read the punch manual carefully as far as possible, strictly follow the instructions, and properly operate the gantry punch according to the process.

The staff of Suzhou Taiyida Machine Tool Co., Ltd. must not ignore the common problems due to the working experience of operating the punch. Ignoring the process and blindly following the trend will probably lead to the safety production accidents of the gantry punch. Suzhou Taiyida Machine Tool Co., Ltd. gives examples of common problems in high-speed production of gantry punch;

1、 Gantry punch operators should have safety awareness, be familiar with the operation process as far as possible, and pay attention to punch warning signs;

2、 The operator of gantry punch must master the basic principle of punch, carry out the operation learning and training for the professional and technical personnel of punch, and operate the gantry punch after reaching the requirements;

3、 When operating the gantry punch press, the staff should pay special attention to: wear work cap and protective shoes, do not need to leave too long hair, and do not wear loose clothes;

4、 Gantry punch has international security measures. Without the specific guidance of technical specialty, it is strictly forbidden to independently update the control circuit, or independently add machines and equipment other than the original equipment;

5、 After ensuring the safety protection equipment of the gantry punch, carry out the air switch test. If there are common faults, clear them immediately, and then carry out all normal work;

6、 Before the operation of the gantry punch, check whether the functions of the clutch and emergency brake pedal of the punch are suitable for everything. If there is any abnormality, shut down the punch immediately for inspection;

7、 When the flywheel of the equipment water pump is not completely terminated or the punching needle is still moving, it is forbidden for people to put their hands or human body into the gantry punch;

8、 Please pay more attention to your health to prevent overwork and over operation.