V-belt of precision punch is located between the main motor and flywheel. Square tube CNC punching machine plays an important role in transferring motor energy to flywheel. Although V-belt is not impressive, its function is irreplaceable. Because of its large load and continuous friction, its loss is inevitable. When it is lost to a certain extent, we must replace it. In the process of replacement, we must strictly implement the following steps:

First of all, turn off the main power supply of the press, move the motor of the press to the side close to the flywheel to loosen the V-belt of the press, then remove it and replace it. When replacing, pay attention to that all belts must be completely replaced. If several old belts can still be used normally, they also need to be removed and replaced and kept as spare parts. Because when the old and new belts are mixed, the uneven elongation of the two belts will greatly reduce the durability. In addition, even if the nominal length of the belt is the same, the actual size may be slightly different. Therefore, we must be very careful to choose products of the same length. In the actual replacement process, the technicians must carefully check whether the V-belt has abnormal wear. After checking the punch maintenance table, if there is excessive wear after normal maintenance, the driving device of the punch must be repaired.

A CNC automatic punch has a total length of 6860, which can punch pipes less than 6 meters long, and can punch 2 and 4 pipes at the same time. One machine can punch all the holes by hand without worry. We choose Suzhou Taiyida Machine Tool Co., Ltd., shelf column CNC punch, good product, good equipment, climbing frame automatic feeding punch, one of the fastest punching manufacturers in China, square tube climbing frame automatic punch, Technology leads the future, automation improves efficiency, your satisfaction is our success, we are constantly redoubling our efforts to create better products and equipment. When punching machine comes to Suzhou, everything is good. Just look for Suzhou Taiyida Machine Tool Co., Ltd! Use process: feeding - starting - automatic feeding - automatic punching - automatic completion.